How To Remove Inserts From Carbon Arrows


Answer ( 1 )


    How To Remove Inserts From Carbon Arrows

    Are you tired of struggling to remove inserts from your carbon arrows? Don’t worry, you’re not alone. Many archers have faced this frustrating issue before. But fear not! With a few tips and tricks, removing inserts can be an effortless task that won’t leave you pulling your hair out. We’ve compiled some practical solutions to help make the process smoother for both experienced and novice archers alike. Keep reading to find out how to easily remove inserts from carbon arrows!

    Why Remove the Inserts?

    There are a few reasons you might want to remove the inserts from yourcarbon arrows. Maybe you’re switching out the broadheads or replacing damaged ones. Or, perhaps you want to shorten the length of your arrows. Whatever the reason, removing inserts from carbon arrows is a relatively simple process that anyone can do at home with just a few tools.

    The first thing you’ll need is an insert remover tool. This is a small, handheld tool that looks like a pair of pliers with V-shaped jaws. You can find these at most archery or hunting stores, or online.

    Next, you’ll need something to catch the inserts as they come out. A coffee mug or small bowl works well for this. Finally, you’ll need a sharp knife or razor blade.

    Now that you have your materials gathered, follow these steps:

    1) Place the arrow in the insert remover tool so that the jaws are positioned on either side of the insert.
    2) Squeeze the handles of the tool together to grip the insert snugly.
    3) twist the remover tool counter-clockwise and pull it outwards to remove the insert from the arrow shaft. The insert should pop right out into your waiting coffee mug or bowl.
    4) If there is any adhesive residue left on the arrow shaft or inside the insert hole, use your sharp knife or razor blade to scrape it away.
    5) That’s it! Your

    The Tools You’ll Need

    When removing inserts from carbon arrows, you’ll need a few tools to make the process go smoothly. First, you’ll need a good set of arrow pliers. These pliers have special jaws that are designed to grip the insert tightly without damaging the arrow shaft. Second, you’ll need a small screwdriver or other sharp tool to help pry the insert out of the arrow shaft. Finally, you’ll need a set of files or a Dremel tool to clean up the inside of the arrow shaft where the insert was seated. With these tools in hand, you’re ready to remove your inserts and get back to shooting!

    The Removal Process

    The removal process for carbon arrows is fairly simple, but there are a few things you need to keep in mind. First, always remove the insert before removing the arrow from the quiver. This will prevent damage to the insert and make it easier to remove the arrow from the quiver. Second, use a small punch or an awl to gently push the insert out of the shaft. Be careful not to damage the shaft in the process. Once the insert is free, you can remove the arrow from the quiver.

    Re-Fletching Your Arrows

    If you’re a serious archer, at some point you’re going to need to re-fletch your arrows. This process isn’t difficult, but it does require a little bit of patience and attention to detail. Here’s a step-by-step guide to help you get the job done right:

    1. Start by removing the old fletching from your arrows. You can do this with a knife or a pair of pliers. Be careful not to damage the shaft of the arrow as you remove the old fletching.

    2. Once the old fletching is removed, it’s time to clean up the shaft of the arrow. Use a piece of sandpaper or a file to remove any burrs or imperfections from the shaft. This will help ensure that your new fletching will adhere properly.

    3. Now it’s time to apply the new fletching to your arrows. There are a variety of ways to do this, but we recommend using adhesive tape or glue designed specifically for fletching purposes. Whichever method you choose, be sure to apply the new fletching in a consistent pattern so that your arrows fly straight and true.

    4. Once the new fletching is in place, allow it to dry completely before using your arrows again. This step is important, as wet or damp fletching can cause your arrows to veer off course when shot.

    By following these simple steps, you can easily re-fletch your arrows and get back to shooting accurately in no time.


    Removing inserts from carbon arrows is simple and straightforward. By immersing the arrow in boiling water, you can loosen up the insert so that it can be pulled out. Once you have done this, make sure to dry off any excess moisture before fletching your arrow or shooting again. With just a little bit of effort and patience, you’ll have your carbon arrows ready for use in no time!

Leave an answer