How To Measure Leaf Springs On A Trailer


Answer ( 1 )


    How To Measure Leaf Springs On A Trailer

    Are you having trouble determining the right size of leaf springs for your trailer? It’s crucial to have properly functioning leaf springs to ensure a smooth and safe ride on the road. But with so many options available, it can be confusing to know which one to choose. Fear not! In this blog post, we’ll guide you through the process of measuring leaf springs for your trailer so that you can make an informed decision and keep your vehicle running smoothly. Get ready to break out those measuring tapes because we’re about to dive in!

    What Is A Leaf Spring?

    Leaf springs are a type of suspension system that is mounted to the rear axle of a trailer. They provide the trailer with damping and suspension capabilities. Leaf springs are made of metal and usually have six or eight coils.

    How to Measure Leaf Springs on A Trailer

    There are a few Methods You Can Use To Measure Leaf Springs On A Trailer. You Can Measure The Outermost Spring Size, Or Measure The Height From The Centre Of The Spring To The Ground.

    To Measure Outermost Spring Size:
    1) Locate the rear axle of the trailer and place a level on it.

    2) Look at the leaf springs on each side of the axle.

    3) Note the individual spring sizes and compare them.

    4) Record the measurements in inches or millimeters.

    5) If you’re measuring in inches, divide the number by 2 to get the outer diameter in inches. If you’re measuring in millimeters, divide by 25.5 to get the outer diameter in mm.

    6) Make a sketch of each spring to help you remember how big they are.

    7) Install a new level on each side of the axle and check that your measurements match up. If not, adjust your measurements until they do.

    Tips for Maintaining Your Leaf Springs

    If you find that your leaf springs are no longer holding the trailer steady, it may be time to replace them. Here are a few tips for maintaining your leaf springs:

    1. Check the condition of the springs before every use. If they are rusty, worn or have damage, they will not function properly and should be replaced.

    2. Keep the springs clean by wiping them down with a soft cloth after each use. This will help prevent rust and build up on the metal.

    3. Inspect the pins in the hub of each spring for corrosion and pitting. If these are present, they will need to be replaced as well.

    4. Check the condition of the suspension system overall every year or two to make sure there is no damage or wear that needs to be fixed.

Leave an answer